SPUD-DRILL FLUID SYSTEM
SWEEP-DRILL FLUID SYSTEM
CLAY-BOND FLUID SYSTEM
ULTRA-WEIGHT FLUID SYSTEM
GLYCO-DRILL FLUID SYSTEM
SHALE-DRILL FLUID SYSTEM
LOW-WEIGHT FLUID SYSTEM
HPHT-DRILL FLUID SYSTEM
SYNTHO-DRILL FLUID SYSTEM
OBM-DRILL FLUID SYSTEM
CARBA-DRILL FLUID SYSTEM
FORMA-DRILL FLUID SYSTEM
LUB-DRILL FLUID SYSTEM
TORQUE-FREE FLUID SYSTEM
SOLID-FREE FLUID SYSTEM
PACKER FLUID SYSTEM
WORK-OVER FLUID SYSTEM
WELL-PLUG LOST CIRULATION SYSTEM
is a Bentonite based mud may be used to impart stability to boreholes
through soft seabed sediments prior to running structural or conductor
casing. 30-40ppb bentonite mud shall be used offshore to sweep top hole
while drilling and to spot on bottom prior to running surface casing.
is a water-based drilling fluid (freshwater / seawater) containing guar gum
as a viscosifier, typically for top hole sweeps, hole cleaning and for riser
less, continuous mixing operations.
Is a water based mud which is formulated by using high molecular Partially
Hydrolyzed Poly Acryl Amid (PHPA) as a shale inhibitor in conjunction with
high performance polymeric fluid loss control to stability of the system can
go up to 257°F.
is a heavy-weight water-based mud which is formulated by using an effective
viscosifier to provide flexible, smooth rheological properties in high
pressure formations with high calcium/salt water influxes. The system is
weighed up to 2.64 S.G. (165 pcf).
Is a high performance water based mud used as a replacement for OBM to
overcome high reactivity of shale problems by using different types of
glycols and inhibitor salts for low to high formation temperatures to
provide stabilization of troublesome shale, minimizing bit balling,
increasing ROP and reducing torque and drag. This system has been approved
as an environmentally friendly drilling fluids system. The temperature
stability of the system goes up to 300°F.
is a water based mud which is formulated by using polymeric fluid loss
control in conjunction with potassium chloride to provide shale and clay
inhibition, hole stability and minimizing bit balling in shale formations.
The temperature stability of the system can go up to 275 °F.
LOW Weight system is a water based mud which is formulated by using hight
tech gloss bubbles to reduce the mud weight in sever loss zones the system
is stable up to 275’F and provide shale inhibition and reduce the formation
is a high performance HPHT water based mud which is formulated by using
special HPHT synthetic polymers and additives to reduce HPHT fluid loss of
the system and provide maximum shale inhibition in HPHT wells, and
Increasing ROP. This system has a temperature stability of up to 375 °F
Is a high performance synthetic based drilling fluid which is formulated by
using degradable synthetic fluids. This system is approved internationally
as replacement of OBM is environmentally restricted areas. This system has
same shale inhibition performance and temperature stability up to 400°F.
This system can be recovered over several usages
Is an oil based mud which is formulated by using high performance
emulsifiers and fluid loss control additives to provide a higher temperature
stability uo to 350°F, shale inhibition reactivity and reducing torque and
CARBA-DRILL system is non-damaging drilling fluid which if formulated by
using high performance water based mud with a high purity calcium carbonate
formulated in different sizes to provide optimum bridging in the reservoir.
The filter cake and bridges are removable by using an acidizing procedure
enabling recovery of the reservoir productivity. This system is also
designed to prevent losses during in high permeable zones.
FORMA-DRILL system is a high performance, non-solid water based mud as a
drill-in-fluid and completion fluid which is formulated by using different
types of formate components for density up to 2.3 S.G(143PCF). It is used in
drilling HPHT reservoirs to minimize formation damage and increase well
productivity. This fluid can be recoverd and filtered for the next
application. The temperature stability of the system goes up to 375’F.
LUB-DRILL is a water-based drilling fluid system is used in directional
drilling for reducing coefficient of friction, torque, drag, bit balling and
increase ROP. It also minimizes the possibility of differential sticking in
high deviated wells.
TORQUE-FREE is a water-based drilling fluid system is used in horizontal
drilling for reducing coefficient of friction, torque, drag and bit balling.
It also minimizes the possibility of differential sticking.
is a high performance, non-solid water-based mud as a drill-in-fluid &
completion fluid which is formulated by using different types of salt
components for density up to 2.3 S.G. (143 pcf). It is used in drilling HPHT
reservoirs to minimize formation damage & increase well productivity. This
fluid can be recovered & filtered for the next application. The temperature
stability of the system goes up to 375 ̊C.
WELL PLUG System is a lost circulation water based fluid which is compatible
with all types of drilling fluids and is formulated by using synthetic
bio-polymers and borate minerals to overcome Extreme Lossesin fractured and
high permeable zones.