Jun 22, 2019 | On 11th March 2019, PDF, launched a new research project to evaluate formation damage in one of Iran's gas fields. During this project, the formation damage types and causes will be evaluated and proper Drill-in, completion and workover fluids for conventional, high weight and HPHT reservoirs will be designed to prevent these damages in other wells. Moreover proper WELL CLEAN FLUID SYSTEM will be prepared to remove these damages, enhance production and acidizing efficiency in drilled wells. |
| Jun 22, 2019 In May 2016, PDF released WELL CLEAN FLUID SYSTEM. This technology optimizes zonal coverage and achieve uniform radial and longitudinal fluid placement throughout the wellbore, thereby optimizing production from the entire horizontal section and maintain and improve permeability all along the pay zone. This system is customized according to the formation type, blockage degree and targeted productivity.
|
This technology uniformly removes formation damage to optimize well productivity. Effective removal of drilling damage before putting wells on production maximizes well performance, cash flow and NPV. WELL CLEAN FLUID SYSTEM uniformly removes formation damage to optimize well productivity and enables operators to retain and improve permeability in horizontal open hole completions and increase production in mature wells without the need for rig intervention. | Jun 22, 2019 | In January 2019, Labsnet's calibration and standard committee select most active members and laboratroies at the end of the year. Ms. Nemati is a member of standard and calibration committee on behalf of Pars Drilling Fluids who has been selected by the committee active member. |
The most active
laboratory in the calibration and standard committee among 190 laboratory
members in Labsnet. (https://labsnet.ir) | Jun 22, 2019 | Pars Drilling fluids laboratories in Tehran and Ahvaz have been audited by NACI in December 2018 and are accredited without any non-unconformities. Both labs are the only accredited drilling fluids lab inside the country based on the API 13 A standard. |
| Jun 22, 2019 Pars Drilling Fluids has expanded laboratory services to oil and gas companies such as Sarvak kish Co, Asmari Filed Services Co, FullTech Co, and has expanded services to PhD, MSc and BSc students in different universities. The current laboratory services covers the followings quality control and research projects including mineral quality control, LCM Quality Control, polymer performance evaluation, specialty chemical such as corrosion inhibitors, H2S Scavengers, ROP Enhancer, Lubricant, all types of drilling fluids as WBM, OBM, SBM and Formation Damage based on international standards. |
Increased
laboratory’s customers from 10 in 2017 to 16 in
2018. | Jun 22, 2019 | In March 2018, Pars Drilling Fluids' Lab was equipped with demulsifier evaluation apparatus for measuring salt content and emulsification evaluation in crude oil based on international (ASTM) and national standard (NISOC). Our laboratory is close to the operation zone and we evaluate demulsifier on fresh crude oil. We can provide tailored services to customers. |
Evaluation of
demulsifier additive in Ahvaz Lab based on ASTM standard and NISOC procedure method. | Jun 22, 2019 | In February 2018, Pars Drilling fluids Lab was equipped with LCM evaluation apparatus in order to test all types of lost circulation material in a sand bed with different fracture sizes. This equipment is used to measure loss circulation materials performance. Based on the type of formation that is choose to study, disks with defined fractures and sand beds with specified meshes can be used to simulate fractured rocks and permeable formations, respectively. Volume of extracted mud from bottom of apparatus is considered of mud loss volume. Its overpressure is 100 psi and is provided by gas pressure. |
Evaluation of all
lost circulation Material in Tehran Lab | Jun 22, 2019 | in
November 2018, PDF released its new product STUCK-LESS that helps with
preventing differential sticking problems. This solid product can be readily
mixed in drilling fluids as a background preventative treatment in
non-reservoir formations to lower many time-consuming problems such as high
torque and drag, stuck pipes and so on. |
High Performance Product for Lowering Possibility of Differential Stuck Pipes in Prone Formations | Jun 22, 2019 | In
October 2018, PDF introduced its new product LPM-BRIDGE that effectively
prevents seepage losses in non-reservoir formations by creating ultra-thin
filter-cake on wellbore surface. This results in better performing wells with
higher qualities, costs reduction for operators and so on. |
High Performance Cellulosic Non-Invasive LPM for Seepage Loss Preventing | Jun 22, 2019 | In 2018,
PDF provided services to drilling 34 hole section in off-shore and onshore
projects and also 27 filtration jobs to filter completion
brines. |
Integrated Drilling Fluids Services withouth NPT | Jun 22, 2019 | In April
2018, PDF introduced its modified ULTRA-CARB FLUID SYSTEM with appropriate
shale inhibitions and maximum lubricity to drill at deviated hole sections in
SPD. In normal practice this interval has been drilled in 2 sections. Due to
some issues this interval has been drilled in one section and PDF developed
and successfully operated a High-Tech Fluid System which is both highly
inhibited and reservoir friendly with >13ppg mud weight. |
High Pressure shaly cap rock and low pressure reservoir has been drilled in a section | Jun 22, 2019 | In July 2018, PDF introduced its new comperhansive software "FLUID
TRACK". It is synchronized with PDF’s Performance Tracking System to
capture all necessary data to provide clients with reporting that meets or
exceeds standard American Society of Mechanical Engineers (ASME) reporting
formats and requirements. |
FLUID-TRACK software as a comperhansive tracking and data-recording software has been run on real operation | Dec 27, 2017
This event was held on 17-19 October 2017, Hotel Mulia Senayan, Jakarta, Indonesia. In
Indonesia, SPE and IATMI have collaboratively produced this successful biennial event since
1999. Its presence and history in Indonesia and the region has cemented APOGCE’s status as the most prominent oil and gas industry event in Asia Pacific that brings together energy companies and industry professionals for technology transfer and information exchange.
Themed “Energy Resilience through Efficiency, Collaboration and Technology”, APOGCE 2017 provides an invaluable platform for participants to gain pertinent insights into the industry through a compelling technical program that features prominent industry leaders and renowned industry experts in stimulating executive plenary, panel, special and project case study sessions. The conference also boasts of its strongest technical program to date, with 35 technical sessions and 8 ePoster sessions for the invaluable sharing of multi-disciplinary technical learning.
Pars Drilling Fluids Company attended in this event in order to serve function in three stands;
I: Technical committee member in two sections from 2016 to 2017.
II: Selected in two panels as co-chair persons as follows;
i) Pore Pressure, Wellbore Stability and Drilling fluids.
ii) Managing Risk and Environment Performance.
II: Accepted paper selected as E-poster presentation on Drilling Session, entitled as “Now It is the Time to Forget Potassium Based Shale Inhibitors by Developing Nano Silica-Alumina Based Drilling Fluid; Laboratory Study Proves Improvement in Shale Inhibition and Temperature Stability”.
R&D mangers of companies like CABOT, Baker Hughes and PETRONAS were interested in this nano-drilling fluid replaced KCL for acquiring environmental and economic concepts.
We hope that by attending this conference, Pars Drilling Fluids has proven that we are a knowledge based company striving to innovate technologies in drilling fluids which can add value to the industry.
We thank APOGCE for organizing this event and we look forward again to our participation.
| Aug 22, 2016
2 years after obtaining ISIRI-ISO/IEC 17025 for our central laboratory in Tehran, we are now pleased to announce that our Ahwaz laboratory has also been accredited by the National Accreditation Center of Iran (NACI) for ISIRI-ISO/IEC 17025.
Many thanks to all our colleagues and stakeholders who made this endeavor possible.
| Aug 13, 2016
After several months of follow up with World Oil-Fluid 2016 to consider PDF as a reputable drilling fluid service company in DRILLING, COMPLETION AND WORKOVERS FLUIDS 2016, Pars Drilling Fluids has been recognized internationally (Page 3) in two categories Drilling Fluids Systems (Pages 6 & 7) and Drilling Fluids Specialty Additives (Pages 28) alongside other international companies such as MISWACO, BAROID, NEWPARK, Baker Hughes and others.
For futher information: www.worldoil.com
| Jul 25, 2016
HEAVY-DRILL FLUID SYSTEM has been used in 12 ¼” Hole Section successfully for the first time to combat high temperature gradient in Marun Oil Field. Also, a special temperature stabilizer (TEMP –STAB L350) to stabilize WBM of 147 PCF (2.35 SG) was introduced. While drilling this section, good hole condition helps to reduce time. Hole has been drilled without any condition trip. Mud properties was stabilized in down hole condition and 9 5/8” casing was set successfully.
| Jul 25, 2016
The 12th International Energy Exhibition was held on 11-14th January 2016 in the Kish International Exhibitions Center with the attendance of 200 internal and external exhibitors. Kish Island is noticeably one of Iran’s most beautiful islands and is a tourist site but given the extensive Oil & Gas reserves in Southern Pars Gas Field, it also hosts many Oil & Gas operators. It was our first time to attend Kish Expo.
| Jul 25, 2016
The largest gathering of stakeholders and companies covering drilling in Iran was held on 20-21st Jan, 2016 at the International Conference Center in Tehran.
Attendance of all stakeholders including contractors, employers, service providers at national and international levels in this gathering, provided a good opportunity to present the capabilities of local companies and also to increase the relationship with foreign companies.
Pars Drilling Fluids had the opportunity to give a presentation titled: “The Integrated Drilling Fluids Services Best Practices Concepts” which was presented by our Chairman, Dr. Koorosh Tahmasbi. Our HR policies were also presented by Mr. Akbari.
Links are available below:
http://www.iranconferences.ir
| Jul 25, 2016
Khuzestan’s Specialized Oil, Gas, Refining, Petrochemical and Drilling exhibition was held from 6th to 10th of December 2015 in Khuzestan International Exhibitions Fairground in Ahwaz.
Khuzestan province contains some of the biggest oil fields in the world such as South and North Azadegan. PDF has an extensive track records in these fields for providing integrated drilling fluids services and waste management. It was our 5th time that we attended this oil show and more than 400 companies participated in the exhibition.
| Jul 25, 2016
OBM was replaced with ULTRA-INHIBIT FLUID STSTEM (WBM) in 8 3/8” hole section in Western Marun Oil Field successfully for the first time. This section contains problematic inter layers of shale and limestone with high pressure stressed shale layers which is the main reason for the hole collapse. ULTRA-INHIBIT FLUID STSTEM is high performance water based mud which provides high shale inhibition with lowest density and it is completely environmentally friendly.
| Jul 25, 2016
The deepest top hole section with 3000m in the complicated Iranian Oil Field “Marun“ has been drilled by CLAY-BOND FLUID SYSTEM successfully. 17 ½” hole section is one of the difficult hole sections with 3000m depth in Aghajari and Mishan Formation with high reactive clays which were caused stuck pipe and downtime during drilling nearby wells.
CLAY-BOND Fluid System was used in this section and good hole condition and smooth hole section was observed in comparison with the previous wells.
| Jun 10, 2015 4th Iranian petroleum Engineering Congress held on 19 and 20 June, 2015 in the conference hall of the international research institute of petroleum industry. The conference was include specialized workshops, pre and post conference along with forums, expert panels, and industrial visits and field strips. | May 09, 2016
We are delighted to announce that Pars Drilling Fluids (PDF) successfully participated in the 21st Iran International Oil, Gas, Refining & Petrochemical Exhibition which was held on the 5th to 8th of May 2016. Our stall was in hall 7, which was one the most important halls as National Iranian Oil Company (NIOC) was also in this hall. Given the new political and economic climate in Iran after years of existing sanctions, we hosted a very lively and fruitful exhibition which we hope our visitors also enjoyed.
The show featured more than 1900 internal and external exhibitors. We look forward to seeing you all in our next exhibitions which will be announced in advanced here in our news section.
| Oct 24, 2015 The second international training seminar of “novel technologies for Drilling Fluids” was held in the International Campus of the University of Sharif in Kish Island since 26th of September to 29th of September 2015 with the attendance of private and government Oil companies chief managers and university professors and well-known European companies such as Imperial College London, Cambridge, and technological European companies including DFS Scotland, LAMBERTI Italy, ADDCON Germany. | Sep 26, 2015
A paper proposal entitled as “Multi-functional Nano additive in Water Based Drilling Fluid for Improving Shale Stability” was accepted on behalf of Pars Drilling Fluids Company for technical presentation at the 9th International Petroleum Technology Conference (IPTC), 6-9 December, 2015, Qatar, Doha. It is a great honor to be mentioned that Pars Drilling Fluid Company is the only company that will participate in this conference. Despite the fact that the primary function of this Nano additive is shale stability, it improves the rheological properties, lubricity and reduces the fluid loss. The most striking feature of this research is that we consider both the technical performance and scientific issues creating these unique characteristics.
| Oct 25, 2015 Certain membership of Pars Drilling Fluids Company (PDF) has been confirmed by Iran President Guideline High-Tech Laboratory Network | Oct 24, 2015 TOPEX 2015: With honor we inform our client network PDF have been selected by judge technical team of TOPEX 2015 as one of best 100 Iranian company. This achiebement reached by our company managment policy and also gathering best team of staffs in the terittory. | Oct 19, 2015 Pars Drilling Fluids Company who was one of the participants explained its activities in the field of waste management and drilling fluids and represents its quality control laboratory. President of World Petroleum Council and Officials of Iranian Offshore oil Company (IOOC) and its subsidiary companies were among the visitors who paid visit to the booth of Pars Drilling Fluids Co. in the exhibition. |
| |
|
|
Compliance Details javascript:commonShowModalDialog('{SiteUrl}'+
'/_layouts/15/itemexpiration.aspx'
+'?ID={ItemId}&List={ListId}', 'center:1;dialogHeight:500px;dialogWidth:500px;resizable:yes;status:no;location:no;menubar:no;help:no', function GotoPageAfterClose(pageid){if(pageid == 'hold') {STSNavigate(unescape(decodeURI('{SiteUrl}'))+
'/_layouts/15/hold.aspx'
+'?ID={ItemId}&List={ListId}'); return false;} if(pageid == 'audit') {STSNavigate(unescape(decodeURI('{SiteUrl}'))+
'/_layouts/15/Reporting.aspx'
+'?Category=Auditing&backtype=item&ID={ItemId}&List={ListId}'); return false;} if(pageid == 'config') {STSNavigate(unescape(decodeURI('{SiteUrl}'))+
'/_layouts/15/expirationconfig.aspx'
+'?ID={ItemId}&List={ListId}'); return false;}}, null); 0x0 0x1 ContentType 0x01 898 Document Set Version History /_layouts/15/images/versions.gif?rev=23 javascript:SP.UI.ModalDialog.ShowPopupDialog('{SiteUrl}'+
'/_layouts/15/DocSetVersions.aspx'
+ '?List={ListId}&ID={ItemId}') 0x0 0x0 ContentType 0x0120D520 330 Send To other location /_layouts/15/images/sendOtherLoc.gif?rev=23 javascript:GoToPage('{SiteUrl}' +
'/_layouts/15/docsetsend.aspx'
+ '?List={ListId}&ID={ItemId}') 0x0 0x0 ContentType 0x0120D520 350
|
